56
IMPORTANT
If a rosette type phone jack is used, it needs be changed to a modular type.
Changing a phone jack from rosette type to modular type must be done by an authorized
technician or under his or her supervision. So, if you need to change the phone jack, you will
have to ask your local Telephone system office or branch. (Please check with your local
Telephone system)
3
Plug the modular cable from your computer in the phone jack on the wall.
Insert the other end of the modular cable from your computer into the modular type phone jack.
Critical Points
Your telephone cannot be used when its modular cable is disconnected. So, do not forget to
plug it again after using the built-in modem.
If you run the modular cable close to a household electrical appliance or tie it in a bundle, a
communications error could occur.
If the supplied modular cable is too short to connect your computer to the phone jack on the
wall, use a commercially available modular cable instead. Note that the use of a long modular
cable could result in a reduction in the data transfer rate or a communication error.
IMPORTANT
If you navigate the Internet for a long time while leaving programs active, a heavy load is
applied to the CPU of your computer and communications via the built-in modem may be
broken unexpectedly. If this happens, exit all running programs other than the Web browser
and e-mail program before connecting to the Internet again.
Rosette type
Modular type
Clove Sec 1 (042-56)
17/10/02, 4:37 PM
56
