Fujitsu ETERNUS CS800 Скачать руководство пользователя страница 590

Страница: 590 / 604

The code of this project is released under a BSD-like license

[license.txt]:

Reserved. Redistribution and use of this software and associated

documentation ("Software"), with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain copyright statements and

notices. Redistributions must also contain a copy of this document.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. The name "ExoLab" must not be used to endorse or promote products

derived from this Software without prior written permission of Intalio Inc.

For written permission, please contact

[email protected]

4. Products derived from this Software may not be called "Castor" nor may

"Castor" appear in their names without prior written permission of Intalio

Inc. Exolab, Castor and Intalio are trademarks of Intalio Inc.

5. Due credit should be given to the ExoLab Project

(

http://www.exolab.org/

THIS SOFTWARE IS PROVIDED BY INTALIO AND CONTRIBUTORS "AS IS" AND ANY

EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTALIO OR

ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

590

ETERNUS CS800

Содержание ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды

Fujitsu ETERNUS CS800, Руководство пользователя

Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды