Fujitsu ETERNUS CS800, Руководство пользователя

Страница: 206 / 604

10.2 NAS Configuration
Allow all users/hosts to
access this share Select this check box to allow all hosts (NFS shares) to
access the share.
Or clear the check box to allow only specified users or
hosts to access the share. To add a user or host to the
access list, click
Add . Specify the Hostname or IP
Address (NFS shares) and the associated permissions
( Read Only or Read & Write ), and then click Apply .
Additional Information
l
To modify the users that are available in the
Workgroup User list, see "Share Access" on page
210 .
l
After you add a user or host to the access list, you
cannot change their permissions. Instead, select
the user or host in the access list and click
Delete
to remove them from the list. Then add the user or
host again with the correct permissions.
3. (Optional) Under Replication Settings , specify replication settings.
For more information about configuring replication for a share, or to set up replication for
the share at a later time, see
"Replication" on page 363 .
4. Click Apply .
If you modify a NAS share that uses the CIFS protocol, you must restart the CIFS
service for the changes to take effect. To restart the CIFS service, first disjoin the
Windows workgroup, then join it again (see
"Windows Domain" on page 207 ).
Restarting the CIFS service will close all active connections to the share. Most
Windows workstations will automatically reconnect, but some applications may
be affected.
Deleting a NAS Share
Delete a NAS share if it is no longer needed. When you delete a share, all data stored on the
share is lost, and any schedules associated with the share are deleted.
If you delete a share configured for Directory/File Based Replication on the source
ETERNUS CS800, the share is
not automatically deleted on the target
ETERNUS CS800. If you do not want to retain the share on the target ETERNUS
CS800, you can manually delete it.
206 ETERNUS CS800