Fujitsu ETERNUS CS800, Руководство пользователя

Страница: 233 / 604

Example: Enter AAA* to display all cartridge barcodes beginning with AAA. Or enter
AAA010-AAA020 to display all barcodes in the specified range. Click the Quick Tip
icon [?] for additional examples.
6. Select the cartridges to unload.
If necessary, use the controls at the bottom of the table to navigate between
multiple pages of results. Select the number of rows to display in the
Show
drop-down box.
7. Click Apply .
Cartridges are moved to a previous storage slot if available. Otherwise, they are moved
to the first available storage slot.
8. Return the partition to an online state (see "Changing Partition Mode" on page 224 ).
10.3.3 Remote Host Access
The Remote Host Access page allows you to configure virtual media changers and tape
drives on the ETERNUS CS800 to communicate with Fibre Channel hosts (initiators). You
can add, edit, and delete hosts as well as view Fibre Channel target ports on the ETERNUS
CS800.
If you do not create and associate a host access group with a partition, the virtual
devices are not visible from the host, and drives cannot be destinations for move
operations.
To access the Remote Host Access page, on the VTL page, click the Remote Host
Access tab.
The Remote Host Access page contains the following tabs:
l
"Remote Host Mapping" on page 233
l
"Remote Hosts" on page 238
l
"Targets" on page 239
l
"Target Usage" on page 240
Remote Host Mapping
The Remote Host Mapping page allows you to view information about existing host access
groups. You can also add or edit groups, and delete groups.
Host access groups allow backup hosts to access virtual devices on a ETERNUS CS800. A
host access group is associated with a partition, a host (a Fibre Channel initiator on the
SAN), and a target (a Fibre Channel port on the ETERNUS CS800). This association allows
the host to access one or more devices in the partition using different host LUNs on the port.
ETERNUS CS800 233
10 Configuration