Fujitsu ETERNUS CS800, Руководство пользователя

Страница: 239 / 604

1. Enter information about the host:
Remote Host WWPN Enter the World Wide Port Name (WWPN) of the host.
(This value is entered automatically by the system.)
Alias (Optional) Enter a descriptive alias for the host.
2. Click Apply .
To delete a host that is no longer needed, click Delete next to the host. You
cannot delete a host of it is currently assigned to a host access group
Targets
Use the Targets page to view the current target (Fibre Channel) configuration.
To access the Targets page, on the Host Access page, click the Targets tab (see "Targets
Page" on page 239 ).
Figure 157: Targets Page
The Targets page displays the Target Port and WWPN for the currently configured targets.
The Backpanel Locations section displays a graphical representation of the Fibre Channel
and Ethernet ports as they appear on the rear of the system.
A mapped (green) status indicates the host is currently logged on to one or more
Fibre Channel target ports.
Select one or more targets and click Reset Target(s) to initiate a Fibre Channel reset on the
selected ports. A reset causes the ports to go through LIP (Loop Initialization Protocol).
ETERNUS CS800 239
10 Configuration