Fujitsu ETERNUS CS800 Скачать руководство пользователя страница 580

Страница: 580 / 604

Original SSLeay License

-----------------------

[email protected]

)

* This package is an SSL implementation written

* by Eric Young (

[email protected]

* The implementation was written so as to conform with Netscapes SSL.

* This library is free for commercial and non-commercial use as long as

* the following conditions are aheared to. The following conditions

* apply to all code found in this distribution, be it the RC4, RSA,

* lhash, DES, etc., code; not just the SSL code. The SSL documentation

* included with this distribution is covered by the same copyright terms

* except that the holder is Tim Hudson (

[email protected]

* Copyright remains Eric Young's, and as such any Copyright notices in

* the code are not to be removed.

* If this package is used in a product, Eric Young should be given

attribution

* as the author of the parts of the library used.

* This can be in the form of a textual message at program startup or

* in documentation (online or textual) provided with the package.

* Redistribution and use in source and binary forms, with or without

* modification, are permitted provided that the following conditions

* are met:

* 1. Redistributions of source code must retain the copyright

* notice, this list of conditions and the following disclaimer.

* 2. Redistributions in binary form must reproduce the above copyright

* notice, this list of conditions and the following disclaimer in the

* documentation and/or other materials provided with the distribution.

580

ETERNUS CS800

Содержание ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды

Fujitsu ETERNUS CS800, Руководство пользователя

Результаты поиска

Содержание ETERNUS CS800

Отзывы:

Похожие инструкции для ETERNUS CS800

Бренды по названию

Популярные бренды