Fujitsu AIRSTAGE V-II, Дизайн и технические данные

Страница: 599 / 711

FUNCTION SETTING
„ „
7) Pressing the START/STOP button, confirm the setting.
(The data will be transferred to the indoor unit.)
GOOD
NO GOOD
Ex.) When remote controller address “01” is selected
4) Pressing the SET TEMP.
p
button or SET TEMP.
q
button, select a remote controller
address (select the indoor unit you want to operate).
Remote controller address
5) Press the FAN button so that the “Function number” display flashes. Then, press either
the SET TEMP.
p
button or the SET TEMP.
q
button to set up the function number.
Function number
6) Press the FAN button so that the “Setting number” display flashes. Then, press either
the SET TEMP.
p
button or the SET TEMP.
q
button to set up the setting number.
Ex.) Function number : 30, Setting number : 01
Setting number
When the data was normally set up on the indoor
unit.
When the data was not set up on the indoor ●
unit (-- is displayed.)
Set up the data again according to the ●
procedure in step 5), 6) above.
- (06 - 127) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN