Fujitsu AIRSTAGE V-II, Дизайн и технические данные

Страница: 591 / 711

SETTING UP EACH INDOOR UNIT
„ „
Repeat steps (1) through to (16). Steps (1) through to (5)
and (13) to (16) only need to carried out if the custom
code is different to the factory setting of “A”.
RESET THE POWER AFTER SETTING UP FUNCTION OF ALL
„ „
INDOOR UNITS
Important
If the reset is not performed, fuction can not be read in normally6 ●
After all the functions have been set, the circuit breaker needs to be switched off for ●
at least 2 minutes6
After the 2 minutes has passed, power can be restored6
The set fuction is stored in the PCB and will remain in memory even when the power
●
is turned off6
However setting function is effective after power reset6
Record the function set in the indoor unit on a label, etc., and affix the label to the
unit so it can be used for after6sales service operations6
Number 0 setting will not indicate TIMER LAMP and FILTER LAMP. *
Once the "RESET" button is pressed on the remote controller, the OPERATION MODE will be *
set in the "AUTO MODE".
Please adjust the OPERATION MODE to either "COOLING" or "HEATING" before trying to
operate the air conditioner.
Note : If CUSTOM CODE is set to anything other than "A" ,the remote control must be set *
accordingly to the INDOOR UNIT setting.
01-01 01-02 01-03
- (06 - 119) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN