Fuji Xerox DocuCentre S1810, Руководство пользователя

Страница: 162 / 202

11 Problem Solving
162
Pr
o
b
lem S
o
lving
11
Printer Problems
This section provides possible solutions to various problems you may encounter when
using the Print features.
Unable to Print
The table below lists possible solutions when you are unable to print.
Symptom Possible Cause Remedy
Data remains in
the printer icon. The machine's power is not
ON. Switch the machine's power ON.
Refer to "Power Source" (P.52).
The PC's cable is
disconnected. Connect the PC's cable.
The machine's cable is
disconnected. Connect the machine's cable.
Refer to "Interface Cables" (P.29).
An error has occurred in the
machine. Check the error information, and take the
required action.
There is a problem in the
network connecting the PC
and machine. Contact your Network Administrator.
The port is not activated. Activate the port to use.
Refer to "Activating the Communication Port
To Use" (P.32).
The machine is connected
to multiple PCs. Wait a while, and then try printing again.
Data has been
sent to the
machine. No paper has been loaded. Load paper.
There is no paper of the
specified size. Load paper of the specified size.
Refer to "Loading Paper" (P.75).
An error has occurred in the
machine. Check the error information, and take the
required action.
Job execution has been
paused. Use the screen to select whether to cancel
the job.