Fuji Xerox DocuCentre S1810, Руководство пользователя

Страница: 40 / 202

2 Environment Settings
40
E
n
vi
ro
n
m
e
n
t Se
ttings
2
- Trap to be Received:
You can set whether to send notification of [Print], [Cold Start] and [Authentication
Failure] events.
z
Add UDP IPv6 Address button
You can add a recipient address for UDP IPv6 trap notification by pressing this
button.
- IP Address:
You can enter the IP address for entry.
- UDP Port Number:
You can set the UDP port No. for entry (a value between 1 and 65535).
- SNMP Version:
You can specify the SNMP version for entry as [v1] or [v2c]. (Default: v1)
- Trap Community Name:
You can enter the trap community name for entry (between 1 and 32 ASCII code
characters). (Default: SNMP_trap)
- Trap to be Received:
You can set whether to send notification of
[Print], [Cold Start] and [Authentication Failure] events.
z
Delete button
You can delete the traps specified for the trap notification recipient IP address by
pressing this button.
z
Edit button
You can display the notification information for the trap you are using. You can
specify the events for which to send notification.
„ Apply button
You can apply changes by pressing this button.
Note • Reboot machine to enable new settings.
LPD (Connectivity > Protocol)
You can set the LPD port.
„ General
z
LPD Port Status
You can check [Enabled] to use LPD. (Default: On)
z
Physical Connection
[Ethernet] is displayed.
z
Port Number
You can set the LPD port No. (a value between 1 and 65535). You must set a
unique number for each port. (Default: 515)
z
Connection Time-Out
You can set the amount of time the machine waits before terminating the
connection when incoming data stops (between 2 and 3600 seconds). (Default: 60)
z
Maximum Connections per Port
The maximum number of connections is displayed.