Fuji Xerox DocuCentre S1810 страница 23 Скачать руководство пользователя

Страница: 23 / 202

About License

Before Usi

g the Mac

PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those of

the authors and should not be interpreted as representing official policies, either

expressed or implied, of the FreeBSD Project.

WIDE DHCP Client

WIDE Project DHCP Implementation
Copyright (c) 1995 Akihiro Tominaga
Copyright (c) 1995 WIDE Project
All rights reserved.

Permission to use, copy, modify and distribute this software and its documentation is

hereby granted, provided only with the following conditions are satisfied:

1. Both the copyright notice and this permission notice appear in all copies of the

software, derivative works or modified versions, and any portions thereof, and that

both notices appear in supporting documentation.

2. All advertising materials mentioning features or use of this software must display the

following acknowledgement:

This product includes software developed by WIDE Project and its contributors.

3. Neither the name of WIDE Project nor the names of its contributors may be used to

endorse or promote products derived from this software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ''AS IS'' AND WIDE

PROJECT DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES

WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. ALSO, THERE

IS NO WARRANTY IMPLIED OR OTHERWISE, NOR IS SUPPORT PROVIDED.

Feedback of the results generated from any improvements or extensions made to this

software would be much appreciated.
Any such feedback should be sent to:

Akihiro Tominaga
WIDE Project
Keio University, Endo 5322, Kanagawa, Japan
(E-mail: [email protected])

WIDE project has the rights to redistribute these changes.

Содержание DocuCentre S1810










































































































































































































Результаты поиска

Содержание DocuCentre S1810

Отзывы:

Похожие инструкции для DocuCentre S1810

Бренды по названию

Популярные бренды

Fuji Xerox DocuCentre S1810, Руководство пользователя

Результаты поиска

Содержание DocuCentre S1810

Отзывы:

Похожие инструкции для DocuCentre S1810

Бренды по названию

Популярные бренды