Fuji Xerox ApeosPort-II C3300 Скачать руководство пользователя страница 545

Страница: 545 / 635

Document Jams

543

Problem Solving

Document Jams

If a document is jammed in the document feeder, the machine stops and an error

message is displayed on the screen. Clear the document jam according to the

instructions displayed, and then load the document again on the document feeder.

Hold the front handle on the left
cover of the document feeder, to
open the left cover until it comes to
a stop.

Note

•

When you fully open the
cover, it enters a fixed
position. Open the cover
gently.

If the document is not caught in the
entry of the document feeder,
remove the document.

If the displayed message instructs
you to turn the wheel, turn the
green wheel to eject the document
upward.

Important •

If the document is caught, do
not pull it out forcibly. The
document could be damaged.

If the displayed message instructs
you to open the inner cover, lift up
the lever with the green label
attached, and open the inner cover.

Turn the green wheel to eject the
document upward.

Important •

If the document is caught, do
not pull it out forcibly. The
document could be damaged.

Close the inner cover, and then close the left cover until you hear it click into place.

If the document cannot be found, move up the document feeder gently, and remove
the document if it is there. Then close the document feeder.

Содержание ApeosPort-II C3300




























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-II C3300

Отзывы:

Похожие инструкции для ApeosPort-II C3300

Бренды по названию

Популярные бренды

Fuji Xerox ApeosPort-II C3300, Руководство пользователя

Результаты поиска

Содержание ApeosPort-II C3300

Отзывы:

Похожие инструкции для ApeosPort-II C3300

Бренды по названию

Популярные бренды