Fuji Electric Frenic-Sce, Инструкция по эксплуатации

Страница: 4 / 78

Introduction of FRENIC Ace Solar Pumping
In the Solar Pumping application the inverter drives an electrical motor (pump), while the power is
supplied usually from a PV panel. FRENIC Ace Solar Pumping inverter specification is equipped
with dedicated functions for the correct operation under these special conditions:

Solar Panel voltage set point calculation at every start (depending on current irradiance
and panel temperature)

True Maximum Power Point Tracking (MPPT) function

Detection of sudden changes of conditions (irradiance)

Stop criteria selectable (frequency and/or power)

Start criteria by solar panel voltage and time (to limit the number of starts)

Dry pump detection function

Water tank maximum level detection function

Low power detection function

Two sets of PID gains
ii