manualshive.com logo in svg

Freescale Semiconductor MCF54455, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor MCF54455 Скачать руководство пользователя страница 30

Freescale Semiconductor

xxv

About This Book 

The primary objective of this reference manual is to define the processor for software and hardware 
developers. The information in this book is subject to change without notice, as described in the 
disclaimers on the title page. As with any technical documentation, the reader must use the most recent 
version of the documentation.

To locate any published errata or updates for this document, refer to the world-wide web at 

http://www.freescale.com/coldfire

.

Portions of 

Chapter 23, “Universal Serial Bus Interface – Host Module,” and Chapter 10, “Universal Serial 

Bus Interface – On-The-Go Module,”

relating to the EHCI specification are Copyright © Intel Corporation 

1999-2001. The EHCI specification is provided “As Is” with no warranties whatsoever, including any 
warranty of merchantability, non-infringement, fitness for any particular purpose, or any warranty 
otherwise arising out of any proposal, specification or sample. Intel disclaims all liability, including 
liability for infringement of any proprietary rights, relating to use of information in the EHCI specification. 
Intel may make changes to the EHCI specifications at any time, without notice. 

Audience

This manual is intended for system software and hardware developers and applications programmers who 
want to develop products with this ColdFire processor. It is assumed that the reader understands operating 
systems, microprocessor system design, basic principles of software and hardware, and basic details of the 
ColdFire

®

 architecture.

Suggested Reading

This section lists additional reading that provides background for the information in this manual as well as 
general information about ColdFire architecture. 

General Information

Useful information about the ColdFire architecture and computer architecture in general:

•

ColdFire Programmers Reference Manual 

(MCF5200PRM/AD)

•

Using Microprocessors and Microcomputers: The Motorola Family, 

William C. Wray, Ross 

Bannatyne, Joseph D. Greenfield 

•

Computer Architecture: A Quantitative Approach

, Second Edition, by John L. Hennessy and David 

A. Patterson.

•

Computer Organization and Design: The Hardware/Software Interface

, Second Edition, David A. 

Patterson and John L. Hennessy.

Содержание MCF54455


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды