Hole Quick Release. We recommend using qty 2 12s 16Ah flight packs with MōVI Carbon as
this will allow 20+ minute flight times. Default Movi Carbon tuning should work well with
ALTA X and FRX Pro can be added to MoVI Carbon to increase control range and robustness.
Isolator Cartridges
Isolator cartridges are available in different durometers, which gives the user the ability to
fine tune vibration damping performance for different payload weights or ambient
temperatures. Durometer options include 30A, 40A, 50A, 60A. The durometer of a cartridge
is shown in recessed lettering on each of the O-rings. Use the chart below as a general guide
choosing the correct isolator cartridges for your payload.
Payload [lb] Payload [Kg] Isolator Durometer Cartridge Qty
0 - 3 *
0 - 1.4
30A
3
4 - 10 *
1.8 - 4.5
30A
6
11 - 19 **
5.0 - 8.6
30A
9
20 - 23 **
9.1 - 10.4
30A/40A
9
24 - 29 **
10.9 - 13.2
40A
9
30 - 32 **
13.6 - 14.5
40A/50A
9
33 - 35 **
15.0 - 15.9
50A
9
>35 ***
>15.9
60A
9
{% hint style="info" %} * Depends on Payload Sensitivity - run as many isolators as possible.
** Mix and Match different durometers to attain desired vibration isolation qualities. When
shooting video it is desirable to run the softest isolators possible without bottoming out the
isolators.
*** 60A isolators should be used when the most rigid connection between payload and
aircraft is desirable. {% endhint %}
1.
To install, place the cartridges between the two isolator plates. Ensure
they are engaged in the track features and are parallel with the plates.
