2.
Once the chassis is open use the 32x32 mm hole pattern in the lower
chassis plate to mount the computer. The hole pattern is sized for M3
bolts.
3.
After mounting the external computer and routing its power and I/O
cables, close the chassis.
Skyview
1.
Remove the (x4) M4x14 combo head bolts that secure the isolator
assembly to the bottom of the aircraft.
2.
Unbolt and remove the center battery support. Using a 10mm wrench,
remove the 4 posts from the bottom of the chassis.
3.
Secure the Skyview landing gear spacer to the chassis using (x4) M4x14
combo head bolts. Attach the Skyview landing gear onto the spacer using
the TITH quick release.
4.
Unbolt (x4) M4x10 socket heads and remove the spacer from the isolation
assembly.
5. Attach the TITH plug using (x4) M4x8 socket head cap screws.
6.
Attach the vibration isolation assembly to the stiffener ribs on top of the
chassis using (x4) M4x14 Combo head screws.
7. ALTA X is now ready to fly in Skyview mode!
MoVI Carbon
To use MōVI Carbon with ALTA X we recommend using the 40 duro isolators that ship with
ALTA X. Install landing gear on MōVI Carbon and attach to ALTA X using the Toad in the
