2.0mm Hex Driver
Skyview Landing Gear*
Alta X Spare Parts
2.5mm Hex Driver
Futaba Radio Controller*
Alta X QuickStart Card
3.0mm Hex Driver
FRX - Alta X Ready*
Alta X Product Card
Alta X Travel Case*
* Optional accessories
Additional Required Components
Radio Controller
ALTA X supports a variety of radio controllers as outlined in the Controller Integration
section of the manual. A minimum of five (5) channels are required, with four (4) used for
flight control, and the remaining one (1) used for mode selection. A radio controller with
between six to ten channels is highly recommended to make use of Return-to-Land (RTH)
and ALTA X’s other functions. It is recommended to use a radio controller with a three-way
switch for Mode selection and a two-way switch for the
Flight Battery
ALTA X can accommodate a variety of Lithium Polymer (LiPo) flight battery packs. Battery
packs must be 12S, having a nominal voltage of 44.4 V. Only run ALTA X using two packs at a
time. For additional information on expected flight duration, refer to the
Box to Flight