4.
To reassemble, refit the enclosure making sure it is well seated and there are no
trapped wires.
5.
Attach the power connector with (x2) M3x10 bolts before reseating the top chassis,
making sure the orientation is correct.
`
6.
Reassemble the remaining chassis fasteners. Take care to align the fasteners correctly.
It is recommended to get all fasteners started before torquing. Loctite 243 or
equivalent should be used in all these locations.
Replacing Booms
{% hint style="info" %} If replacing more than one boom, replace one at a time to reduce the
chances of mixing up connections. {% endhint %}
1.
Remove the top chassis as detailed in the previous section.
