Amcrest Force Hand Drone OB1-M User Manual
Press and hold the power button for
1 to 2 seconds to power off the
drone. The green LED will turn off.
Turn on the drone and hold it in your hand, extend your hand
forward, and then release the drone to start flying.
5. Flying Speed - Medium & High Speed Modes
4. Flight Interaction
3. Flight
2. Shut Down
1. Start Up
Power Button
Flying speeds of the drone are indicated by the color LED that is illuminated.
A green LED light indicates the drone is flying in medium speed. The drone
will be set to medium speed by default.
To increase the speed of the drone to high speed mode, click the power
button. A blue LED light will appear indicating the drone is flying in high speed.
To revert back to medium speed mode, press the power button again.
Press and hold the power button for 1
to 2 seconds to turn on the drone. A
green LED will appear indicating the
drone is on.
The drone will fly upward and begin to hover. If there is no interaction
with the drone for 1 to 2 seconds, the drone will begin to descend and
continue to hover.
Approach the bottom of the drone to allow the drone to ascend upward.
The drone will hover and begin to descend if no interaction is detected.
When a hand or other object approaches the drone, it will move in the
opposite direction of the object once it is detected.
The drone can be affected during flight if it encounters strong light, wind,
obstructions, or glass.
