FRÄNKISCHE profi-air 250/360 flex, Инструкция по установке и эксплуатации

Страница: 49 / 108

AUTO
Installation and operating instructions profi-air 250/360 flex
49
1
2
3
4
5
1 2
Operator side
Rear
4.1.4 Structure of the external control panel
No. Function
1 Control – manual ventilation mode / fireplace mode
2 Indication of ventilation mode 0 to 4
3 Indication and control – summer bypass
4 Indication and control – weekly programme / automatic mode
5 Indication and resetting – error messages (e.g., filter replacement)
No. Function
1 Connection socket to connect the ventilation unit
2 Clamps for snapping in the holding plate
4.2 Commissioning / adjustment of profi-air 250/360 flex
4.2.1 Basics of commissioning / adjustment
n
Prior to putting the unit into operation for the first time.
n
If the total room area subject to ventilation needs to be adjusted.
n
If the air distribution system needs to be adjusted (e.g., retrofit installation of extract air filters).
n
If the filter class in the ventilation unit needs to be subsequently adjusted (change from G4 to F7 supply air filter).
Criteria when commissioning / adjustment of the ventilation unit must take place:
n
The airflow rates for the utilisation unit have been calculated in accordance with national regulations and are available for
adjustment.
n
The ventilation unit has been installed and connected according to the installation and operating instructions (e.g., power,
condensate, air pipes, silencer, etc.).
n
The entire air distribution system has been installed.
n
Insulation of fresh air and exhaust air pipes is provided.
n
All supply air and extract air outlets can be accessed.
n
Unit, filter and pipe system are not contaminated.
n
Internal finishing works (e.g., drywall installation, paint work) have been completed.
n
The intended use according to installation and operating instructions is ensured.
The following must be verified prior to commissioning / adjustment: