FRÄNKISCHE profi-air 250/360 flex, Инструкция по установке и эксплуатации

Страница: 34 / 108

AUTO
AUTO
Links versio n(A) Left u nit unitá sinist ra Versio n gau che
AUTO
AUTO
A
B
Links versio n(A) Left u nit unitá sinist ra
Versio
n gau che
A
AUTO
AUTO
A
B
Links versio
n(A)
Left u nit unitá sinist ra Versio n gau che
A
AUTO
AUTO
A B
Links versio
n(A)
Left u nit unitá sinist ra Versio n gau che
A
A AUTO
AUTO
Links versio n(A) Leftt u nit unitá sinist ra Versio n gau che
A AUTO
AUTO
A
B
Links versio
n(A)
Left u nit unitá sinist ra Versio n gau che
A
AUTO
AUTO
AUTO
A
B
Links versio
n(A)
Left u nit unitá sinist ra Versio n gau che
A
Installation and operating instructions profi-air 250/360 flex
34
3.12 Central humidity sensor
Fully automatic control for comfort ventilation:
n
Water content as an indicator of ambient air pollution
n
Saving of energy due to needs-based ventilation
Switching of the ventilation modes with installed central humidity sensor:
The automatic mode regulates the air performance for supply and extract air if the
central humidity sensor is installed in the extract air connector of the ventilation unit.
The humidity is factory-set to a value of 45 % r.H.,
Using the profi-air cockpit pro software or the wireless remote control, you can adjust the factory-set
humidity of 45 % r.H.
Electrical connections must be established by authorised and qualified personnel and in the “dead”
state of the ventilation unit only. In addition, applicable local regulations and safety provisions must be
complied with.
n
If the humidity exceeds the set target value, the ventilation unit will continuously operate in ventilation mode 3.
n
If the humidity drops below the set target value, the ventilation unit will adjust the airflow rates by gradual reduction.
n
If the humidity remains below the set target value over a longer period of time, the ventilation unit will switch to ventilation
mode 1.
Installation of the central humidity sensor / operating mode A