FRÄNKISCHE profi-air 250/360 flex, Инструкция по установке и эксплуатации

Страница: 61 / 108

AUTO
AUTO
Installation and operating instructions profi-air 250/360 flex
61
Manual summer bypass
The summer bypass can also be opened manually if the target values for the automatic
summer bypass are not yet reached but a cooler supply air temperature is desired.
In order to being able to open the summer bypass manually, the fresh air temperature
must exceed 9 °C and be below the supply and/or extract air temperature.
The manual summer bypass will then be active for one hour.
Control unit
Push the button to activate the summer bypass. The LED will be lit continuously as soon
as the summer bypass has opened completely.
profi-air cockpit app
You can activate the manual summer bypass in the “Bypass” menu item. If the bypass flap is
open, the app will no longer show the airflows crosswise.
Manual summer temperature control mode
In the so-called manual summer temperature control mode, the supply air fan is switched
off and cooler fresh air flows in through an open window.
The fresh air temperature must be over 14 °C for the manual summer temperature control
mode to be activated.
Control unit
Press and hold the button for approx. 5 seconds to activate or deactivate the summer
temperature control mode. The LED is flashing every 5 seconds in activated summer tem-
perature control mode.
profi-air cockpit app
You can activate the manual summer temperature control mode in the “Bypass” menu
item.
With activated manual summer temperature control mode, the app will only show one
extract airflow.
This function can be used only if no fireplace is available (underpres-
sure!)
This function can be activated only if the setting in the profi-air cock-
pit pro software under “Settings” – “House” – “Fireplace in the
house” is set to “no”.