Franke 116.0541.717, Инструкция по установке и эксплуатации

Страница: 14 / 132

SMP 86 M _/F
– 14 –
EN
Removing the side frames
X X
Bend the crosspiece engaged in the fixing bush
downwards and remove it from the groove.
X X
Tilt the frame upwards by approx. 60° and push it
slightly in the direction of inclination.
X X
Keeping the frame tilted, remove the two top
hooks from the respective holes.
Fitting the side frames
X X
Keeping the frame tilted, insert the top hooks
in the respective holes, pushing lightly in the
direction of inclination.
X X
With the frame tilted, pull in the direction of
inclination until the top hooks stop against the
outside of the compartment wall.
X X
Turn the frame towards the compartment wall.
Bend the crosspiece engaged in the fixing bush
downwards and remove it from the groove.
Replacing the oven lamp
A
Franke ovens are equipped with a circular lamp
positioned in the top left area at the back of the
compartment. To replace the oven lamp, proceed
as follows:
X X
Turn off the power to the appliance by means of
the omnipolar switch used for connecting it to
the electrical system, or disconnect the plug if
accessible.
X X
Unscrew the glass cover (A).
X X
Unscrew the lamp and replace it with one
resistant to high temperatures (300 °C),
with the following characteristics:
– Voltage: 220/240 V ~ 50-60 Hz
– Power: 25 W
– Connection: G9
X X
Refit the glass cover (A) and reconnect the power
supply.
TECHNICAL DATA
Power supply voltage and frequency 220-240 V, 50/60 Hz
Total power and fuse rating 2850 W ~ 16 A
Power and heating elements
Upper 1000 W
Lower 1250 W
Grill 2250 W
Fan 30 W
Tangential fan 15 W
Oven lamp 1 x 25 W