Construction Hoist Fraco SEH Premium Range
Assembly and Operating Manual
Page 45 of 69
doc no. 98030718-01
8.3.3.3 Sliding gate
In normal operation, the sliding door can be unlocked
from the inside only:
Check that the door lock release switch on the car
control is blue
Turn the door lock key switch to "unlocked" posi-
tion.
Using the central handle grip (2) push the sliding
gate up until it stops.
After closing the door again, you must turn the door
lock key switch to “locked” again.
The car will not
move if the door is not locked!
ATTENTION
, never leave the car with the door lock
key switch to “locked” position! The door will lock itself
when it closes
. Be careful not to lock yourself out of
the unit!
NOTE:
In case of power failure, the door can still be
unlocked with the door lock release switch at a landing
level, if the battery is still active. It can also be manu-
ally opened.
Fig. 35 Car sliding gate
8.3.3.4 Manual opening
The sliding gate can be manually opened from
outside the car, using the universal T-tool on the
door interlock as indicated on the door instruction
panel.
ATTENTION!
After opening the door, you must
turn the door interlock back to locked position.
Fig. 36 Door instruction panel
8.3.3.5 Arriving at a level with the car
Unlock the car sliding gate and open it
Unlock and open the landing gates.
Load car with tools and/or materials and/or passengers.
Close the landing gate and lock it.
Close the car sliding gate and lock it with the door lock key switch.
Now the car is ready to travel.
1
2
