Construction Hoist Fraco SEH Premium Range
Assembly and Operating Manual
Page 6 of 69
doc no. 98030718-01
Only work while wearing close fitting clothing, safety
shoes and hard hat. Do not wear jewellery such as
necklaces and rings. There is a risk of injury from
getting caught or being pulled in.
Find a doctor immediately if there are any injuries or
accidents.
Consequences of not complying with safety instructions
Non-compliance with safety instructions can result in danger both for personnel as well as for
the environment and the machine. Non-compliance can lead to the forfeit of any compensa-
tion claims.
2.3 Operating
safety
The machine must be set up and dismantled according to this assembly manual and un-
der supervision by an authorized person specified by the contractor.
Install the equipment so it is exactly vertical and stable and anchor it to the building.
Observe the load bearing capacity of the equipment.
Only use the machine in a technically fault-free condition; use in a safety and risk con-
scious manner while observing the operating manual.
Immediately remedy faults that could impair safety.
Immediately shutdown the machine if there are safety-relevant changes to the unit or its
operating behavior, and report the fault to the company management or its representa-
tive.
Do not make any changes, mount parts on or modify the ma-
chine. This also applies to installing and adjusting safety fea-
tures, such as e.g. limit switches.
Do not change, remove, override or bypass safety devices.
Immediately renew damaged and/or removed notices and warn-
ing signs as well as safety labels.
If work is interrupted, switch off the machine at the main switch
and secure against switching on again with a padlock.
Fig. 1 Main switch
In situations that present a risk to the operating personnel or
the machine, shut down the machine by pressing the
EMERGENCY STOP button.
Bring down and shut down machine when wind speeds are
>45 mi/h (>72 km/h).
Fig. 2 Emergency stop button
