133
The “Setting the Record Protect function” menu allows you to turn the Record Protection function On or Off.
When this function in turned “On”, you cannot record, paste, or erase data. Use this function to protect your important
data from being accidentally erased.
2. Select the desired slave type with the [JOG] dial and press
the [ENTER/YES] key.
It will be set to the selected slave type.
If you have set Slave Mode to “On” in the previous section “Slave Mode Setting,” you can choose what type of external
sync signal that the VF160 synchronizes to. This mode allows you to choose the external sync signal type.
1. Select “Slave Type” in the menu selection display and press
the [ENTER/YES] key.
The currently set slave type will flash. “
Vari
” will flash in
the initial setting.
3. Press the [EXIT/NO] key (or STOP key) to exit from the SETUP
mode.
1. Select “Rec Protect” in the menu selection display and then
press the [ENTER/YES] key.
The presently set item (On or Off) will flash. “
Off
” will
flash in the initial setting.
2. Select “On” or “Off” with the [JOG] dial and then press the
[ENTER/YES] key.
It will be set to the selected item (“On” or “Off”).
Selecting “
Off
” enables recording; you can record, paste,
and erase data.
Selecting “
On
” disables recording; and you cannot record,
paste, or erase data.
3. Press the [EXIT/NO] key (or STOP key) to exit from the
SETUP mode.
<Notes>
• You need to input MTC from an external device to the
VF160 with any Slave Type.
• The VF160 re-chase window is fixed to ten frames. That
is, if an offset between the master device and slave device
exceeds ten frames, the VF160 interprets that as out of
sync, and tried to chase and lock to MTC sent from the
master device. This operation is called “re-chasing.”
During the re-chase operation, audio output is muted.
If the slave machine slips with MTC from the master
device by less than ten frames, the slave machine
continues running while recognizing the slippage.
• When you set the Slave Type, the Vari Pitch function is
automatically disabled. (The “VARI PITCH” indicator
turns off.)
• Initial setting:
“Vari”
• Offset mode option: “Vari”, “Free”, “SPDIF” or “adat”
* You can set the mode for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the power
to the VF160.
• Initial setting:
“Off”
• Offset mode option:
“On” or “Off”
* You can set the mode for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the VF160.
<Note>
When recording is disabled (“On”) and you try to record,
paste, or erase data, the VF160 displays “Protected!” for
a second, indicating that you cannot perform the
operation.
To perform the operation you need to enable recording
(“Off”).
Flashing
Flashing
Free
Vari
(Initial setting)
SPDIF
adat
After chase lock is achieved, the VF160
enters the free run mode with reference
to the internal clock.
If Digital In is selected, the VF160 runs
in sync with the clock derived from Digi-
tal In.
After chase lock is achieved, the VF160
runs in the varipitch mode to keep sync
with the master. Note that if the Digital
In is selected, the VF160 runs in the same
manner as "Free".
After chase lock is achieved, if the VF160
receives an S/PDIF digital signal from the
master, it runs in sync with the S/PDIF
clock. Note that, if Digital In is selected,
the VF160 runs in sync with the clock
derived from Digital In.
After chase lock is achieved, if the VF160
receives an adat digital signal from the
master, it runs in sync with the adat
clock. Note that, if Digital In is selected,
the VF160 runs in sync with the clock
derived from Digital In.
Setting the Record Protect function [“Rec Protect”]
Setting the Slave Type [“Slave Type”]
Содержание VF-160
Страница 153: ......
