139
The “Pair Fader Set” menu sets whether or not you simultaneously control the adjacent odd and even chan-
nels.
Normally, each channel fader on the VF160 acts independently. By setting "Pair Fader Set" to "On", you can
pair faders of two adjacent channels, allowing the odd channel fader to control the partner (even) channel's
level. This function is useful for stereo source, etc.
You can also control "Pair Fader channels" simultaneously during channel parameter editing, etc. See <Hint!>
below.
• Initial setting:
"Off" for all pair channels
• Options:
"On", "Off" for each pair
channels
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of
thesong data.
* The settings are maintained after you turn off the
power to the VF160.
1. Select “Pair Fader Set” in the menu selection display and press
the [ENTER/YES] key.
The pair fader set status (on or off) list is shown, where
the channel 1 & 2 line is highlighted. In the initial condi-
tion, all paired channels are set to "
Off
".
Flashing
2. Select the desired paired channels via the [JOG] dial, and
press the [ENTER/YES] key.
The setting field ("On" or "Off" is shown) for the selected
channels flashes.
3. Select "On" or "Off via the [JOG] dial, and press the [EN-
TER/YES] key.
The setting is completed and the display returns to high-
light a single line, as shown in step 1 above.
4. To set another pair, repeat steps 2 and 3.
5. After completing all settings, press the [EXIT/NO] key (or the
[STOP] key) to exit the SETUP mode.
<Hints!>
For paired fader channels, besides fader control,
the following functions are controlled simulta-
neously.
• Effect send level adjustment
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, the icons for both channels start flash-
ing, and you can control the effect send levels for both
channels simultaneously using the
[JOG]
dial.
• Effect send pre/post setting
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, the icons for both channels start flash-
ing, and you can set pre or post for the effect sends of
both channels simultaneously using the
[JOG]
dial.
• Aux send level adjustment
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, the icons for both channels start flash-
ing, and you can control the Aux send levels for both
channels simultaneously using the
[JOG]
dial.
• Aux send pre/post setting
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, the icons for both channels start flash-
ing, and you can set pre or post for the Aux sends of
both channels simultaneously using the
[JOG]
dial.
• EQ (HI/MID/LO) adjustment
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, the icons for both channels start flash-
ing, and you can adjust EQ for both channels simulta-
neously.
• On/off of SOLO
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, you can select on or off of solo moni-
tor for both channels simultaneously.
• On/off of channel mute
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, you can select on or off of mute for
both channels simultaneously.
• Setting of INPUT (TRACK/INPUT) SEL (channels 9
through 16 only)
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, you can select the input sources for
both channels simultaneously.
• Setting of REC source for BUSS recording
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels, you can select the REC sources for
both channels simultaneously.
• Setting of the built-in compressor
By pressing either of the
[CH STATUS/CH SEL]
keys for
paired channels (channels 13-14 or 15-16), you can
set the compressor parameters for both channels si-
multaneously.
<Note>
If you control the even channel fader which is
paired, the following message appears.
Controlling the paired even channel fader does
not affect the level.
Pair Fader setting [Pair Fader Set]
Содержание VF-160
Страница 153: ......
