Fostex VF-160, Руководство по эксплуатации

Страница: 36 / 154

36
Creating an event memory
1. Press the [REWIND/PREV] key while holding down the [SHIFT]
key to skip back to the previous event memory point.
2. Press the [F FWD/NEXT] key while holding down the [SHIFT]
key to skip advance to the next event memory point.
Skip locate
With the Skip locate function using the event memo-
ries, the unit automatically recognizes the locate point
and locate there. When the Skip locate is executed, the
locate point is shown on the screen and you will know
where the current position goes.
Locating an event memory
You can store up to 99 event memory points (00 to 99). These event memory points can be used for locate functions
described below as well as for the “
scene event map
” function described in “
Chapter 3 Mixer functions
”.
Viewing the event memories
1. Press the [SCENE-STORE/MAP] key while holding down the
[SHIFT] key.
The display shows the event number select screen for the
scene event map, in which you can view and check the event
memories created by the procedure above.
The unit for event memories - ABS, Bar/Beat/Clk or MTC
- depends on the time base setting.
<Hint>
Event memory numbers are assigned in ascending order
of ABS time, regardless of order in which event memories
are created.
For example, if you create event memories in order as
shown in the upper diagram below, the event memory
numbers are assigned as shown in the lower diagram.
EVT 03
07M30S
EVT 02
05M00S
EVT 01
02M30S
ABS0
EVT 07
17M30S
EVT 06
15M00S
EVT 05
12M30S
EVT 04
12M30S
<Hint>
You can delete unnecessary event memories. See “Edit-
ing the event map” in “Advanced mixer operations” de-
scribed later for details.
3. After viewing the screen, press the [EXIT/NO] key.
The display returns to the Normal display.
07M30S 05M00S 02M30S
ABS0
17M30S 15M00S 12M30S 12M30S
2 3 6 7 1
5
4
2. Press the [STORE] key.
The key lights up (in red) and “
Hit Any Memory Keys!
” appears
on the screen.
3. Press the [LOCATE/EVT MEM] key while holding down the
[SHIFT] key.
“
Entry EVT**
” (where ** shows the number) appears for a
short time, while the time held in step 1 is entered in the
event memory.
Current position
EVT 03
07M30S
EVT 02
05M00S
EVT 01
02M30S
ABS0
EVT 06
17M30S
EVT 05
15M00S
EVT 04
12M30S
[SHIFT] key + [REWIND] key [SHIFT] key + [F FWD] key
10M00S
<Hint>
By sequentially executing the key operation above as many
times as required, you can locate the desired event
memory. In the above screen, for example, to locate event
01 from the current position, press the
[REWIND/PREV]
key
three times while holding down the
[SHIFT]
key.
1. At the desired position while the VF160 is stopped or during
playback, press the [HOLD/>] key.
The time when pressing the
[HOLD/>]
key is held on the
screen.
2. Rotate the [JOG] dial to scroll through the event memorylist.
Locate by specifying the event memory
1. Press the [SCENE-STORE MAP] key while holding down the
[SHIFT] key to bring up the event map screen.
2. Use the [JOG] dial to select the desired event number, and press
the [LOCATE] key.
The unit locate the selected memory point and stops, while
the display returns to the Normal display.
When selecting an event memory, you can know the near-
est event memory point to the current point by the flash-
ing event number (in the example below, event number 02
is the nearest).
Flashing