Fostex VF-160, Руководство по эксплуатации

Страница: 88 / 154

88
This section will describe digital recording from external digital devices using the
[DATA IN]
connector of the VF160.
Digital signals recorded are either S/P DIF or adat digital signals.
<Çaution (IMPORTANT)>
To digitally record to the VF160, only input digital signals
(S/P DIF or adat) with the same sampling rate (44.1kHz/
16bit) as the VF160.
Selecting the program to record
If several programs are set, use the program selection
function to pre-start the program to record.
Setting the digital input
1. Set the VF160 digital input as shown below, from the "Digital
In" menu in the SETUP mode.
For more details on setup procedures refer to the "SETUP
Mode" on page 134.
<When recording S/P DIF digital signals>
Set the "
Digital In
" (SPDIF) of the SETUP mode, as shown as
an example below. With this setting the LEFT channel of
the S/P DIF digital signal is recorded on track 1 and the
RIGHT channel is recorded on track 2.
As shown in this case, when selecting a S/P DIF digital sig-
nal it is possible to set odd and even tracks next to each
other.
<When recording adat digital signals>
Set the "
Digital In
" of the SETUP mode to "
adat
".
This setting records the adat digital signals on ch1-ch8 on
tracks 1-8. In other words, the ch1 signals are recorded on
track 1, ch2 signals on track 2, and so on. Simply put, the
digital signal is recorded on tracks corresponding to the
adat digital signal channel.
2. When the "Digital In" settings are completed, press the [EXIT/
NO] key to escape from the SETUP mode.
The LCD shows the Normal Display.
Either “
” or “ ” lights up on the display, when
proper digital signals (S/P DIF or adat) from an external
digital device is input in DATA IN.
If either “ ” or “ ” flashes on the display it means
that the digital signal input is incorrect. In such case check
the connection cable and digital output setting of the ex-
ternal device.
<Caution (IMPORTANT)>
Do not make connections such as for input of S/P DIF digi-
tal signals into the VF160 DATA IN connector when “Digi-
tal In” is set to “
adat”
. It could result in abnormal symp-
toms such as reduction in operating speed of VF160 and
also create noise.
Digital recording from an external digital device
This section describes digitally record from an external S/P DIF digital device (CD, MD, DAT, etc.) or adat digital
device (Fostex D-1624, D-824, VC-8, VM88, etc.) to the VF160.
Digital Recording
ACCESS
PHANTOM
INPUT SEL SOURCE
REC ASSIGN
BUSS DIRECT
REC TRK REC TRK
AUTO RTN
AUTO PUNCH
START IN OUT END IN ALIGN SEL OUT
DISP SEL PGM SEL SETUP
INT
MIXDOWN
A RTN
A PLAY
SCENE SEQ.
TIME BASE
CLIPBOARD
MARK
1 2 3 4 5 6 7
HOLD/ STORE EDIT
UNDO
/REDO
VARI
PITCH LOCATE SCRUB
P.EDIT EVT MEM
F FWD REWIND PLAY STOP RECORD
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
PREV NEXT
JOG
SHUTTLE
AUTO
PUNCH
EXIT/NO
EJECT
ENTER/YES
FADER
ADJUST
LEVEL
ADJUST
SHIFT
CH PARAM EDIT
CH VIEW FADER
TRACK
LO-G PAN
PRE/POST
MID-G/F/Q AUX1/AUX2
COMP PRE/POST
EFF1/EFF2 HI-G/F/Q
EQ/COMP
MUTE MUTE
EFF1 EFF2
EFF EDIT
MAP DIRECT RCL
CLEAR
STORE RECALL
SCENE MUTE OFF PLAY GREEN REC RED INPUT ORANGE CH STATUS CH STATUS/CH SEL
1/9/A 2/10/B 3/11/C 4/12/D 5/13/E 6/14/F 7/15/G 8/16/H
PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK
LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC 0 10 0 10
PHONES MON OUT TRIM
INPUT
6/14/F 7/15/G 5/13/E 4/12/D 3/11/C 2/10/B 1/9/A
INSERT UNBAL BAL
8/16/H
BAL INSERT UNBAL R L
PHONES MON OUT
MUTE OFF PLAY GREEN REC RED INPUT ORANGE
CH STATUS CH STATUS/CH SEL
1 2 3 4 5
6
7 8
9
A
10
B
11
C
12
D
13
E
14
F
15
G
16
H
MASTER
TRACK
INPUT
-60
-50
-40
-30
-20
-10
0
+6
-60
-50
-40
-30
-20
-10
0
+6
-60
-50
-40
-30
-20
-10
0
+6
-60
-50
-40
-30
-20
-10
0
+6
-60
-50
-40
-30
-20
-10
0
+6
- ∞ - ∞ -
∞
- ∞ - ∞
ACCESS
PHANTOM
OPTICAL
DIGITAL OUT
adat digital signal or S/P DIF digital signal
DATA IN
DIGITAL/DATA OUT
75
OFF ON
ANALOG INPUT MODE CLOCK DIGITAL MODE
ADAT/ANALOG CONVERTER
POWER
WORD
1-4 1-8 1-2 ON STBY INT(44.1k) OPTICAL
LOCKED
S/P DIF ADAT
OPTICAL
DIGITAL OUT