Fostex VF-160, Руководство по эксплуатации

Страница: 114 / 154

114
<CD-RW drives usable with the VF160>
To save/load song data or make audio CDs, you can use a SCSI-type CD-RW drive unit or the Fostex optional
CD-RW drive (Model CD-1A).
If you are going to use a SCSI-type CD-RW drive unit, check the operation-confirmed drive unit in the
following ways. Note that Fostex does not guarantee operation with a CD-RW drive that is not listed in the
operation-confirmed drive list.
For details about an optional CD-RW (CD-1A), ask your local Fostex distributor.
<Customers who are accessible to Fostex internet web site>
Confirm the model number and manufacturer of operation-confirmed CD-RW drive by accessing the fol-
lowing URL.
<http://www.fostex.co.jp/int/pages/sets/faqset.htm>
<Customers who are not accessible to Fostex internet web site>
Contact your local Fostex distributor.
CD-RW disc
CD-R disc
With a CD-RW drive, you can use not only CD-RW discs but also CD-R discs. Note that CD-R discs has some
restrictions as shown below.
<Care and handling of CD-RW/CD-R discs>
<Note>
A CD-RW/CD-R disc on which VF160 data is recorded can only be played by Fostex machines. Do not
play it by non-Fostex devices. The drive or system used may be damaged.
However, a CD-R disc with audio CD format created by the Fostex machine can be played by general
machines such as audio CD players. (If an audio CD is made using a CD-RW disc, it can be played back
only by a player that supports CD-RW playback. You cannot playback such a disc by a conventional CD
player that does not support CD-RW playback.)
You can save (record) data to a disc as many times
required. Note that when saving new data, it is re-
corded after the previously recorded data is erased.
In other words, every time you save new data, all disc
data is rewritten. (See “Saving data” described later.)
You can save (record) data to a disc only once.
You cannot save data to a recorded disc. You can, of
course, load data as many times as required.
The writing and reading speeds for data save and load of the VF160 are automatically set as below.
• Writing speed: according to a CD-RW drive used, however the maximum speed is 8 times.
• Reading speed: according to a CD-RW drive used.
The writing speed depends on a CD-RW drive but it is limited to 8 times.
For save/load of the VF160 data, use discs that can be written at 4 times or higher speed. Do not use discs
that only can be written at real-time or twice speed.
<About data writing and reading speeds for data save/load>
Save/Load using CD-RW/CD-R