manualshive.com logo in svg

Forum 755000, Руководство по эксплуатации

Поделиться
Скачать
Forum 755000 Скачать руководство пользователя страница 44

Operation Maintenance Manual

 

Power Slip PS-500  

 PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

44

SA

FE

TY

2.4.4 

Organizational Measures

The operating company is responsible for ensuring that all 
legally and officially prescribed approvals for operation of 
the PS-500 are present and in compliance with national 
laws and regulations. The required personal protective 
equipment (refer to section IX "Personal Protective 
Equipment (PPE)" on page 11) must be provided by the 
company operating the PS-500. All safety features present 
must be checked regularly in compliance with national and 
local requirements. Warning signs and safety notices on 
the PS-500 and its components must be legible at all times 
and replaced as required. The operating instructions must 
be kept so that they are available to those operating the 
PS-500 at all times.

Personal Protective Equipment

The required Personal Protective Equipment (PPE) must be 
used when operating the Power Slip PS-500. This has to be 
provided by the operating company.
The following PPE is recommended:

 

- Oil resistant protective clothing,

 

- Protective gloves,

 

- Eye protection,

 

- Safety shoes,

 

- Protective helmet.
All parts of the protective equipment must be checked 
regularly for damage in compliance with the specific 
national regulations and replaced as required. 

2.4.5 

Human Error

Ignorance of hazards, inattentiveness and limited reactions 
can lead to hazard situations while working with the 
Power Slip PS-500.

Safe Work

1.  All personnel working on the PS-500 are responsible for 

paying attention to their colleagues.

2.  Consumption of alcohol and drugs is prohibited.
3.  Work on and with the PS-500 is not permissible after 

taking medication which reduces reactions. 

4.  AT LEAST visual contact must exist between the operator 

in the doghouse and the personnel at the PS-500, to 
allow communication by hand signals.

5.  Always keep your personal protective equipment in 

perfect condition.

6.  All personnel working on and with the PS-500, must be 

familiar with and observe the safety precautions in this 
OMM and on the PS-500.

7.  The instructions for handling and maintenance intervals 

specified in this OMM must be observed.

8.  Keep a copy of this OMM near the PS-500, where it is 

accessible at all times.

9.  All personnel working on and with the PS-500 have to 

know the PS-500 limitations.

10.  Do not permit people near the unit controls during 

inspections or repair, unless they are supervised or part of 
the inspection/repair team.

11.  Recognize all pinch points on moving components and 

maintain a safe distance from them.

12.  Ample loose clothing, watches or bracelets, which can be 

dangerous in some circumstances. Therefore, they are not 
recommended to be worn on the job.

13.  Do not store materials, tools or other equipment on or 

next to the PS-500.

14.  Always listen for abnormal noises during operation.

 

» In the event of an abnormal occurrence (noise, irregular 

motion, etc.), immediately stop operation and secure the 
area for inspection.

 

» Notify the site supervisor immediately.

Содержание 755000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды