manualshive.com logo in svg

Forum 755000, Руководство по эксплуатации

Поделиться
Скачать
Forum 755000 Скачать руководство пользователя страница 39

Operation Maintenance Manual 

06-2018 

PN 757000-D - Revision: 17 (up to SN 138212) Power Slip PS-500 

39

SA

FE

TY

2.3 

Safety Precautions

The safety precautions in this OMM are indicated using 
standardized depictions and symbols. Examples of the 
symbols and terms used in this OMM are explained below. 
These are used in the form shown wherever possible 
hazards are present.

2.3.1 

Warning Signs

The safety precautions in this OMM are indicated using 
standardized depictions and symbols. Examples of the 
symbols and terms used in this OMM are explained below. 
These are used in the form shown wherever possible 
hazards are present.

 DANGER

Suspended load!

This indicates injury risks from 
transporting heavy components.

 DANGER

Tipping hazard for components!

This indicates injury risks from tipping 
components.

 WARNING

Danger of pinching/crushing 
hands!

This indicates injury risks from moving 
parts, which pose a hazard of pinching 
or crushing hands.

 WARNING

Danger of pinching/crushing feet!

This indicates injury risks from moving 
parts, which pose a hazard of pinching 
or crushing feet.

 WARNING

Danger of stumbling/tripping!

This symbol warns of tripping hazards, 
which can lead to stumbling and 
falling resulting in injuries.

 Caution

Risk of stumbling/tripping!

This symbol warns of tripping hazards, 
which can lead to stumbling resulting 
in injuries.

 WARNING

Health hazards from service 
products!

This symbol warns of health hazards 
resulting from contact of service 
products (e.g. Lubricants) with the 
skin, mucous membranes, eyes and 
respiratory paths.

 WARNING

Separated hydraulic lines pose an 
injury hazard!

This symbol marks areas where injuries 
are possible from disconnecting 
hydraulic lines in which the pressure 
has NOT been relieved.

 WARNING

Defective hydraulic lines pose an 
injury hazard!

This symbol marks areas where injuries 
are possible from defective hydraulic 
lines.

Содержание 755000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды