manualshive.com logo in svg

Forum 755000, Руководство по эксплуатации

Поделиться
Скачать
Forum 755000 Скачать руководство пользователя страница 20

Operation Maintenance Manual

 

Power Slip PS-500  

 PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

20

D

ES

C

RIP

TION

1.2.1 

Body and Door

The body 

q

 and the door 

w

 are the basic elements of the 

PS-500. They are connected with two hinge pins. One 
hinge pin can be pulled to open the PS-500. The other 
hinge pin serves only as a hinge to swing the door. When 
installed to the Rotary Table, the PS-500 is almost flush 
mounted to the rig floor. Four hoisting eyes are fastened 
to the body for transportation tasks. The PS-500 can be 
installed in all common Rotary Tables. 

 

1.2.2 

Hydraulic Centering Guide System [HCGS] 

The HCGS centers the pipe and guides the drill string. Both 
processes take place before setting the Slips and are used 
to prevent the drill string from hitting against the Inserts. 
The HCGS consists of two identical modules in which the 
Guide Plates are guided eccentrically in a  
dove-tail groove. This prevents the Guide Plates from 
falling out even when not fastened properly. When 
the HCGS is opened, each of the modules are locked 
automatically by a special mechanism, which guarantees 
high safety. The operator can only release this lock 
manually. The Guide Plates are opened and closed by 
hydraulic cylinders. The HCGS can be switched on and off 
as required using a control valve in the upper section of 
the body. 

 

CAUTION

 Always ensure that the right size Guide 

Plates are installed for the respective pipe diameter.

1.2.3 

Slip and Insert Carrier Assembly 

Insert Carriers 

q

 are inserted to the Slip Assembly and 

provide direct contact to the drill string by the Inserts. Each 
Slip has one Insert Carrier, whose position is dictated by 
the geometry. The Slip Assembly 

w

 serves as a frame for 

the Insert Carriers. The Slip Assembly consists of three Slip 
segments. All segments are connected with hinge pins. 
The middle segment is attached to the lifting cylinders 
of the PS-500. An adaptation of the PS-500 to another 
tube size only requires an exchange of the existing Insert 
Carriers. These can easily be lifted from the top of the 
PS-500. The Slip Assembly remains in the PS-500.

 

CAUTION

 Always ensure that the right sized Insert 

Carrier are installed for the respective pipe diameter.

Fig. 7: 

Body and Door of the PS-500

Fig. 8: 

HCGS of the PS-500

Fig. 9: 

Slip and Insert Carrier Assembly of the PS-500

w

q

w

q

Содержание 755000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды