Forum 755000 Скачать руководство пользователя страница 68

Страница: 68 / 154

Operation Maintenance Manual

Power Slip PS-500

PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

SION
IN

TION

4.2

Operation

Ensure that the PS-500 is operated
only by personnel trained for this work
and familiar with the risks involved in
operating the PS-500.

Read these instructions carefully before
operating the PS-500.

WARNING

Danger of pinching/crushing body!

» Do not step between the body and

the door.

» Do not stand within the opening

range of the door while it is being
opened or closed!

WARNING

Danger of pinching/crushing feet!

Transporting and setting down heavy
components.

» Never step below moving PS-500

parts.

WARNING

Separated hydraulic lines pose an
injury hazard!

» Do not fix any disconnected

hydraulic lines without
depressurizing the complete
hydraulic system and all hydraulic
lines and couplings.

WARNING

Defective hydraulic lines pose an
injury hazard!

» Protect yourself from leaks.

WARNING

Hydraulic fluid can pose a health
hazard!

Hydraulic fluids can lead to skin and
eye injury and poisoning symptoms
upon contact.

» Avoid direct contact with hydraulic

fluids.

WEAR PROTECTIVE GLOVES!

WEAR EYE PROTECTION!

WEAR SAFETY SHOES!

WEAR PROTECTIVE HELMET!

Operational Safety

1. The Checklists to verify correct installation and

commissioning have been fully processed and
completed. There are no points on the lists that
would have to be answered with NOK.

2.  Operate the PS-500 smoothly and carefully.
3.  Do not touch the PS-500 while in operation.
4.  All hoses have to be laid so that they cannot

interfere with your work or that you can stumble
upon them.

5. It is recommended to have the PS-500 operated by

the driller.

6. Insert Carriers are set on the correct section of the

pipe.

7. Both feedbacks appear when they have to appear.
8. No foreign objects obstruct the view between

the operating personnel at the borehole and the
operator in the drilling cabin.

9. Do not operate the PS-500 without the HCGS or the

Top-Cover.

Содержание 755000



























































































































































Результаты поиска

Содержание 755000

Отзывы:

Бренды по названию

Популярные бренды

Forum 755000, Руководство по эксплуатации

Результаты поиска

Содержание 755000

Отзывы:

Бренды по названию

Популярные бренды