manualshive.com logo in svg

Forum 755000, Руководство по эксплуатации

Поделиться
Скачать
Forum 755000 Скачать руководство пользователя страница 38

Operation Maintenance Manual

 

Power Slip PS-500  

 PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

38

SA

FE

TY

2.2 

Safety Equipment

The Power Slip PS-500 is equipped with various safety 
features for protection of the operating personnel:
•  During operation, all moving parts are secured against 

reaching in by screwed covers.

•  The hydraulic lines are connected with safety quick-

release couplings.

•  Hazard points on the PS-500 are marked with signs, 

indicating the type and consequences of a hazard as 
well as measures to prevent it.

•  All components, particularly parts requiring 

replacement during conversion work when changing 
pipe sizes, are equipped with threaded holes for 
screwing in load bolts or with fixed load bolts.

•  External hoses are provided with a chafe guard.
•  The PS-500 is equipped with two feedbacks, which  

indicate "Slip Assembly is set" or "Slip Assembly is not 
set".

•  Guide Plates, which are part of the HCGS and the Top-

Cover, prevent the pipe from hitting the Inserts and 
guarantee effective centering of the pipe before the 
Slip Assembly has been set.

•  Treads on the HCGS and the Top-Cover are covered 

with an anti-slip coating.

 

» Never remove the safety equipment or replace 

it with safety equipment not approved by 
FORUM Handling Tools. Failure to observe this 
instruction can lead to hazardous situations for which 
FORUM Handling Tools cannot be held responsible.

 

» Always keep all safety equipment in working condition 

and check integrity regularly.

 WARNING

Reuse of safety components can 
cause accidents.

 

» Never reuse safety-relevant parts 

(such as securing cables or plates, 
discs or washers).

 

» Replace such components with 

new safety parts.

Fig. 46:  Hazardous areas on the PS-500

2 

Safety

SAFETY IS EVERYONES RESPONSIBILITY BUT IT 
STARTS WITH YOU!

The PS-500 is designed and produced with consideration 
of all required safety precautions. Failure to observe the 
safety precautions and operating instructions specified 
in this OMM can lead to hazardous situations when 
operating the PS-500. While it is not possible to eliminate 
all hazardous situations with awareness and instruction 
from this OMM, good judgement should be used at all 
times surrounding the use of the PS-500. The PS-500 
should only be used for its intended purpose. Rectify all 
faults immediately, which could have a negative effect on 
the PS-500 safety.

2.1 

General Safety Precautions

Ensure that work on the PS-500, particularly installation, 
maintenance and repair work, is performed only by 
personnel with the necessary qualifications and who 
are familiar with the associated risks (refer to section VI 
"Obligations of the Operating Company" on page 8). 
For safe and proper operation of the PS-500, it is 
essential that all personnel working on the PS-500 take 
the prescribed safety measures and observe the safety 
precautions specified in this OMM. Before switching on 
and before working on the PS-500 Always ensure that no 
one is put in a hazardous situation. All safety features must 
be installed completely before switching on the PS-500. 
Safety features may be released only when:
1.  The entire PS-500 is switched off. 
2.  Switching back on unintentionally is not possible.
The PS-500 contains components subject to wear. After 
longer periods of operation, the safety can be reduced due 
to wear. Service the PS-500 regularly in compliance with 
the maintenance chart (refer to section 6.2.5 "Inspection 
intervals und Inspection tasks -" on page 137) to ensure 
that all safety requirements are Always fulfilled. Check the 
specified wear limits regularly. Replace worn or defective 
parts immediately with new parts. If safe operation is no 
longer guaranteed, switch off the PS-500 and secure it 
against being switched back on unintentionally. Advise the 
responsible service organization. Rectify every fault, which 
affects the safety, immediately.

INFO

The operating company is responsible for 
ensuring safe and correct use of the PS-500 
within the sense of the hazard and risk analysis. 
The operating company is also obligated to 
issue and supervise observance of operating 
instructions on safe use as well as to observe the 
instructions in this OMM.

Содержание 755000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды