manualshive.com logo in svg

Forum 755000, Руководство по эксплуатации

Поделиться
Скачать
Forum 755000 Скачать руководство пользователя страница 134

Operation Maintenance Manual

 

Power Slip PS-500  

 PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

134

IN

SP

EC

TIO

N / 

M

AI

N

TE

NAN

C

E

Prerequisites for maintenance work

1.  Ensure that the PS-500 is on a good supporting 

surface.

2.  Provide for sufficient lighting at the workplace.
3.  The PS-500 must be removed from the  

Rotary Table.

4.  Ensure that PS-500 is disconnected from hydraulic 

system. 

Instructions for inspection and 
maintenance

1.  In the event of visible damage or excessive wear, 

contact the FORUM Handling Tools

 

Service 

Department or an authorized repair company.

2.  Ensure that exclusively the FORUM Handling Tools 

Service Department or an authorized repair 
company observing the FORUM Handling Tools 
welding instructions performs welding work on cast 
parts.

3.  Ensure that all other maintenance work is performed 

only by personnel trained for this work and familiar 
with the risks involved in operating the PS-500.

4.  Ensure that all repair work not performed by 

FORUM Handling Tools

 

is Nevertheless accomplished 

in compliance with the manufacturer's specifications 
and instructions.

5.  Small cracks and irregularities, which Do not affect 

the safety or proper operation of the PS-500, can be 
removed by grinding (Refer to Critical Areas).

6.  Always check the repaired part in a suitable manner 

to ensure that the defect has been remedied.

6 

Inspection / Maintenance

This chapter contains important information on how to 
service your PS-500 safely, correctly and economically. 
It helps to avoid dangerous situations and reduce repair 
costs and downtimes. Furthermore, the reliability and the 
service life of the PS-500 will be increased by following the 
instructions in this OMM.

Ensure that only sufficiently qualified 
and trained personnel accomplish 
setup and installation work.

Read these instructions carefully before 
servicing the PS-500.

WEAR EYE PROTECTION!

WEAR PROTECTIVE HELMET!

WEAR PROTECTIVE GLOVES!

WEAR SAFETY SHOES!

 WARNING

Lubricants can pose a health 
hazard!

Lubricants irritate skin and eyes.

 

» Avoid contact with lubricants.

Содержание 755000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды