manualshive.com logo in svg

Forum 755000, Руководство по эксплуатации

Поделиться
Скачать
Forum 755000 Скачать руководство пользователя страница 11

Operation Maintenance Manual 

06-2018 

PN 757000-D - Revision: 17 (up to SN 138212) Power Slip PS-500 

11

G

EN

ER

A

L

VII-04 

Linguistic Conventions

This OMM uses terms and symbols intended to help you 
find information more easily, perform work steps more 
effectively and recognize dangerous situations more 
quickly. These symbols and terms are explained below. All 
important text sections are printed in bold face.

 

- Lists without any necessary sequence are marked with 

a dash (-) at the left side of the column.

•  Individual activities to be performed are indicated by a 

dot (•) to the left of the column.

Relevant consequences of an action or work step 
are marked with an arrow (>) in the left margin. 
ESequential numbers (1, 2, 3,) in the left margin, indicates 
enumerations in a certain sequence (e.g. a series of work 
steps).
For example:
1.  Unscrew nuts on equipment feet.
2.  Lift equipment.
For greater clarity, the illustrations are located in the 
right column with the text opposite or directly below 
the associated text section. Larger illustrations extending 
over the entire width of the page are located before 
the explanatory text. The illustrations are provided with 
captions in telegraph style.

Fig. 3: 

Illustration Example

INFO

Additional information and relationships requiring 
special attention are distinguish in this manner.

VII-05 

Personal Protective Equipment (PPE)

The following symbols located at appropriate points in 
the OMM indicate that it is mandatory to wear personal 
protective equipment:

WEAR PROTECTIVE GLOVES!

WEAR EYE PROTECTION!

WEAR SAFETY SHOES!

WEAR PROTECTIVE HELMET!

WEAR EAR PROTECTION!

Содержание 755000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды