Fortinet Gate 60D, Руководство администратора

Страница: 637 / 706

WAN optimization and web caching Monitoring WAN optimization
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
637
http://docs.fortinet.com/ • Feedback
If the tunnel request does not include an authentication group authentication will be based
on the client side Local Host ID in the tunnel request. The server side FortiGate unit
searches its peer list to match the client side Local Host ID in the tunnel request. If a
match is found, authentication is successful. If a match is not found authentication fails.
If the server side FortiGate unit successfully authenticates the tunnel request, the server
side FortiGate unit sends back a tunnel setup response message. This message includes
the server side Local Host ID and the authentication group that matches the one in the
tunnel request.
The client side FortiGate unit then performs the same authentication procedure as the
server side FortiGate unit did. If both sides succeed tunnel setup continues.
Monitoring WAN optimization
Using WAN optimization monitoring you can view and improve WAN optimization
performance. The monitoring tools help isolate performance problems, aid in
troubleshooting, and enable network optimization and capacity planning.
Go to WAN Opt. & Cache > Monitor to view the WAN optimization monitor.The monitor
unit uses collected log information and presents it in graphical format to show network
traffic summary and bandwidth optimization information.
Figure 426: WAN optimization monitor
Refresh Traffic Summary
Refresh Bandwidth Optimization