HA
System Config
FortiGate Version 4.0 Administration Guide
178
01-400-89802-20090424
If HA is already enabled, go to
System > Config > HA
to display the cluster members list.
Select
Edit
for the FortiGate unit with Role of master (also called the primary unit). When
you edit the HA configuration of the primary unit, all changes are synchronized to the other
cluster units.
Figure 93: FortiGate-3810A unit HA configuration
You can configure HA options for a FortiGate unit with virtual domains (VDOMs) enabled
by logging into the web-based manager as the global admin administrator and then going
to
System > Config > HA
.
Note:
FortiGate HA is not compatible with PPP protocols such as PPPoE. FortiGate HA is
also not compatible with DHCP. If one or more FortiGate unit interfaces is dynamically
configured using DHCP or PPPoE you cannot switch to operate in HA mode. Also, you
cannot switch to operate in HA mode if one or more FortiGate unit interfaces is configured
as a PPTP or L2TP client or if the FortiGate unit is configured for standalone session
synchronization.
Note:
If your FortiGate cluster uses virtual domains, you are configuring HA virtual
clustering. Most virtual cluster HA options are the same as normal HA options. However,
virtual clusters include VDOM partitioning options. Other differences between configuration
options for regular HA and for virtual clustering HA are described below and in the
FortiGate HA Overview
and the
Содержание Gate 60D
Страница 678: ...Reports Log Report FortiGate Version 4 0 Administration Guide 678 01 400 89802 20090424 http docs fortinet com Feedback...
Страница 704: ...Index FortiGate Version 4 0 Administration Guide 704 01 400 89802 20090424 http docs fortinet com Feedback...
Страница 705: ...www fortinet com...
Страница 706: ...www fortinet com...