Fortinet Gate 60D, Руководство администратора

Страница: 169 / 706

System Wireless Rogue AP detection
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
169
http://docs.fortinet.com/ • Feedback
Figure 88: Rogue Access Point list
You can also enter information about accepted and rogue APs in the CLI without having to
detect them first. See the
system wireless ap-status
command in the FortiGate
CLI Reference .
Refresh Interval Set time between information updates. none means no updates.
Refresh Updates displayed information now.
Inactive Access Points Select which inactive access points to show: all, none, those detected
less than one hour ago, or those detected less than one day ago.
Online A green checkmark indicates an active access point. A grey X indicates
that the access point is inactive.
SSID The wireless service set identifier (SSID) or network name for the
wireless interface.
MAC Address The MAC address of the Wireless interface.
Signal Strength /Noise The signal strength and noise level.
Channel The wireless radio channel that the access point uses.
Rate The data rate of the access point.
First Seen The data and time when the FortiWifi unit first detected the access point.
Last Seen The data and time when the FortiWifi unit last detected the access point.
Mark as ‘Accepted AP’ Select the icon to move this entry to the Accepted Access Points list.
Mark as ‘Rogue AP’ Select the icon to move this entry to the Rogue Access Points list.
Forget AP Return item to Unknown Access Points list from Accepted Access Points
list or Rogue Access Points list.