Default web portal configurations
SSL VPN
FortiGate Version 4.0 Administration Guide
564
01-400-89802-20090424
Tunnel Mode widget
The Tunnel Mode settings display tunnel information and actions in user mode. As an
administrator, you can also configure a split-tunneling option. The presence of this widget
implies that the user group will have tunnel mode enabled. If
IP Range
is selected, the IP
range of the tunnel must be specified in the user group.
Figure 371: Tunnel Mode widget
Edit
Select to edit the information in the
Tunnel Mode
widget. Opens the
Tunnel Mode
configuration window.
Remove widget
Select to close the
Tunnel Mode
widget and remove it from the web
portal home page.
OK
Select
OK
to save the configuration. If you select
OK
, the
Tunnel
Mode
configuration window closes.
Cancel
Select to exit the
Tunnel Mode
configuration window without saving
any changes made.
Name
Enter a name for the
Tunnel Mode
widget.
IP Mode
Select the mode by which the IP address is assigned to the user.
Range
The user IP is allocated from a configured range of IP addresses.
User Group
The user IP is assigned on a per-user basis using a RADIUS received
from the RADIUS user group used to authenticate the user. See
“Dynamically assigning VPN client IP addresses from a RADIUS
record” on page 573
.
Split tunneling
Select to enable split tunneling.
Start IP
Enter the starting IP address for the split tunnel range.
Edit
Remove widget
Содержание Gate 60D
Страница 678: ...Reports Log Report FortiGate Version 4 0 Administration Guide 678 01 400 89802 20090424 http docs fortinet com Feedback...
Страница 704: ...Index FortiGate Version 4 0 Administration Guide 704 01 400 89802 20090424 http docs fortinet com Feedback...
Страница 705: ...www fortinet com...
Страница 706: ...www fortinet com...