Foma M702iG, Руководство пользователя

Страница: 297 / 433

290
Data
Com
m
u
n
icat
ion
Data Communication
When FOMA handset is connected to a PC, data
communication is enabled in 3 modes: packet
communication, 64K data communication and
data transfer (OBEX).
Data Communications Enabled from
FOMA Handset
■ Packet communication
Communication mode charged by the size of data
sent and received. It allows data communication
at the maximum rate of 384 Kbps for reception
and 64 Kbps for sending.
To use packet communication, you must connect
FOMA handset to a PC with FOMA USB Cable
(optional) or Bluetooth and use an access point of
DoCoMo internet connection service "mopera U"
or "mopera" compatible with FOMA packet
communication.
• Communication charges may become high when
you send or receive large amounts of data using
packet communication.
■ 64K data communication
Communication mode charged based on time of
connection to network. It allows data
communication at the rate of 64 Kbps.
To use 64K data communication, you must
connect FOMA handset to a PC with FOMA USB
Cable or Bluetooth and use an access point of
DoCoMo internet connection service "mopera U"
or "mopera" compatible with FOMA 64K data
communication or an access point compatible
with ISDN synchronous 64K.
• Communication charges may become high when
connected to a network for a long time using 64K
data communication.
■
Data transfer (OBEX)
Communication mode for sending or receiving
data using FOMA USB Cable (optional), infrared
function or Bluetooth.
To transfer data between FOMA handsets and a
PC connected to each other with FOMA USB
Cable or Bluetooth, you must install the Data Link
Software (P340) to the PC. To transfer data with
infrared or Bluetooth function, that function must
be installed in a PC or other devices used for
communication.
Connecting FOMA Handset to PC, etc.
For data communication, FOMA handset can be
connected to a PC, etc. in the following ways:
■ Using FOMA USB Cable (USB connection)
FOMA handset connected to a device such as a
PC with FOMA USB Cable is available for all
communication modes (packet communication,
64K data communication and data transfer
(OBEX)).
• When using FOMA USB Cable for connection, a
communication setup file (driver) must be installed.
For details on connection and each operation, refer
to "
データ通信マニュアル
(Data Communication
Manual)" (PDF format).
• When using FOMA USB cable, set "USB mode
Setting" to "Communication mode".
■
Using Bluetooth (Bluetooth connection)
Use of Bluetooth makes all communication
modes (packet communication, 64K data
communication and data transfer (OBEX))
available.
• When using Bluetooth for connection, use a
standard Bluetooth modem or a Bluetooth modem
provided by Bluetooth device manufacturers. For
installation and settings, contact manufacturers of
your PC or Bluetooth device.
■
Using Infrared
Use of infrared function makes data transfer
(OBEX) available.
Data can be sent and received to/from a device
such as a PC with infrared function installed.
• Communicating → P252
Precautions for Use
■
Usage fee of internet service provider
When using internet, you will be charged for
usage fee from internet service provider
(hereinafter, referred to as provider) connected.
This usage fee is to be paid directly to the
provider, independently of FOMA service usage
fee. For details of the usage fee, contact the
provider.
DoCoMo internet connection service "moperaU"
or "mopera" is available. "mopera U" is a charged
service requiring subscription. "mopera" is a
service free of charge requiring no subscription.
■ Setting access point (provider, etc.)
Packet communication and 64K data
communication use different access points.
Packet communication requires to use an access
point compatible with packet communication and
64K data communication requires one compatible
with FOMA 64K data communication or ISDN
synchronous 64K.
• DoPa access points are not available.
• PHS64K/32K data communication access points
for PIAFS, etc. are not available.
Da
ta
Co
m
m
u
n
ic
a
tio
n