Foma M702iG, Руководство пользователя

Страница: 395 / 433

1
Data Communications
Connecting the FOMA handset and a PC allows
you to use three types of data communications
(packet communication, 64K data
communication and data transfer (OBEX)).
Available Data Communications from
the FOMA Handset
■ Packet Communication
Packet communication is a communication
method whose charges are based on the amount
of data exchanged. It allows data communication
at a maximum speed of 384Kbps for receiving
and 64Kbps for sending.
In order to perform packet communication,
connect the FOMA handset and a PC using a
FOMA USB Cable (optional) or via Bluetooth and
connect to an access point of DoCoMo's Internet
connection service "mopera U" or "mopera", that
handles the FOMA packet communication.
• Note that the communication fees may become
high if you use packet communication to send/
receive data.
■
64K Data Communication
64K data communication is a communication
method whose charges are based on the time
connected to the network. It allows data
communication at a speed of 64Kbps.
In order to perform 64k data communication,
connect the FOMA handset and a PC using a
FOMA USB Cable (optional) or via Bluetooth and
connect to an access point of DoCoMo's Internet
connection service "mopera U" or "mopera", that
handles the FOMA 64K data communication or
an access point that handles ISDN synchronous
64K.
• Note that the communication fees may become
high if you use 64K data communication to connect
for a long time.
■ Data Transfer (OBEX)
Data transfer is a communication method that
exchanges data using the FOMA USB Cable,
infrared, or Bluetooth.
In order to transfer data by connecting the FOMA
handset and a PC with the FOMA USB Cable,
data link software must be installed on the PC. In
order to transfer data using infrared or Bluetooth,
a communication device such as a PC must be
equipped with infrared or Bluetooth capability.
Connecting the FOMA Handset and
PC, etc.
The following connection methods are available
to connect the FOMA handset to a PC to perform
data communications:
■ Using the FOMA USB Cable (optional) (USB
Connection)
Connecting the FOMA handset to a PC with the
FOMA USB Cable allows you to use all
communication methods (packet communication,
64K data communication and data transfer
(OBEX)).
• The communication setup files (drivers) must be
installed before connecting with the FOMA USB
Cable.
→ P4
• When using the USB connection, set the USB
mode to "Communication mode".
→
P5
■
Using Bluetooth (Bluetooth Connection)
Using Bluetooth allows you to use all
communication methods (packet communication,
64K data communication and data transfer
(OBEX)).
• Use a standard Bluetooth modem or a Bluetooth
modem provided by a Bluetooth device
manufacturer to connect via Bluetooth. For
installation and configuration of a modem, contact
the manufacturer of your PC or Bluetooth device.
■
Using Infrared
Using infrared allows you to use the
communication method of data transfer (OBEX).
You can exchange data with a PC, etc. with
infrared capability.
Precautions before Use
■ Internet Service Provider Fees
Fees to an Internet service provider (ISP) may be
required to connect to the Internet. These fees
are in addition to the FOMA service fees and are
paid to your ISP directly. For detailed information
on connection fees, contact your ISP.
You can use "mopera U" or "mopera", DoCoMo's
Internet connection service. A separate
subscription (fee-based) is required to use
"mopera U". To use "mopera", no separate
subscription is required, and no monthly usage
fee applies.
■ Setting the Internet Connection
(Internet service providers, etc.)
Packet communication and 64K data
communication use different access points. For
packet communication, use an access point
compatible with packet communication, and for
64K data communication, use the FOMA 64K
data communication or use an access point
compatible with ISDN synchronous 64K.
• DoPa access points cannot be connected.
Continued on the next page