Foma M702iG, Руководство пользователя

Страница: 321 / 433

314
Overseas Use
■
When "Network Search Mode" is set to
"Manual"
Select a network from the Manual list screen
and press
h
[Register].
• After coming back to Japan and if the icon indicating
the network status remains out of the service area,
set "Band" to "Automatic" or "3G" and "NW Search"
to "Automatic".
• Even if "Network Search Mode" is set to "Manual",
the Manual list screen may not open depending on
radio wave reception level or network search
conditions.
Searching Again Network to be
Connected
You can search again network and switch it
when network automatic searching and/or
setting is not appropriately carried out or when
you want to use another telecommunication
carrier's network.
a
Network screen (P313)
y
"New Network"
Start network searching.
• When "NW Search Mode" of "Network Setup" is set
to "Automatic", an appropriate network, when
detected, is automatically set.
• When "NW Search Mode" of "Network Setup" is set
to "Manual", manual list screen is displayed, when
detected. Go to Step 2.
b
Select network
y h
[Register]
The selected network is set.
■
Confirming network code
Select a network and press
c
. Press
c
on
the network code display screen to set the
network.
Network detail screen opens allowing to
confirm network code.
• When an appropriate network is not connected,
change "NW Search Mode" of "Network Setup" to
"Manual", search network again and manually
select target network.
• On network code display screen, press
h
[Function] and select "Copy All" to copy all character
information on network code display screen.
My Network List
Setting Telecommunication
Carrier to be Connected by
Priority
You can register Up to 20 networks to be
searched and set by priority by FOMA handset.
a
c y
(Settings)
y
"Network"
y
"My
Network List"
The My Network List opens.
• Networks with high priority levels appear in the
upper part of the list.
■ Confirming details of network
Select a network and press
c
. Network detail
screen opens allowing to confirm network code
and priority.
b
"[Add Network]"
The Network ID screen opens.
■ To add a network specifying the priority
Specify the position of the network to be added
in the list, press
h
[Function] and select
"Insert".
c
Enter network code
The added network appears at the bottom of the
list.
• If a network was added specifying the priority, the
network is added above the selected network.
• Depending on the signal reception, a network that is
not registered may get connected.
• The following operations can be performed by
pressing
h
[Function] on the network ID screen:
- Select "Editing Function" to edit the characters.
→ P298
- Select "Cancel Entry" to cancel saving.
Function Menu on My Network List Screen/
Network Detail Screen
a
My Network List screen/Network detail
screen
y h
[Function]
y
Perform the
following operations
Insert
Register and insert a network, above a selected network.
Go to Step 3 (P314) in "Setting Telecommunication Carrier
to be Connected by Priority".
Edit
Modify selected network. Go to Step 3 (P314) in "Setting
Telecommunication Carrier to be Connected by Priority".
My N
e
twork L
ist