Foma M702iG, Руководство пользователя

Страница: 223 / 433

216
i-
app
li
• Some items may not be changed depending on the
software.
a
The software list screen (P212)
y
Select
software
yh
[Function]
y
"Permissions"
y
Perform the following
operations
Network Access
Set whether to make communications while software is
active.
y
"Yes"/"No"/"Confirm every session"
Stand-by net
Set whether to make communications while the i-appli
stand-by screen is active.
y
"Yes"/"No"
GetSysInfo
Set whether to permit the use of icon information for i-mode
mail, Message R/F, in/out of the service area, battery level,
or Manner Mode when the software starts.
y
"Yes"/"No"
Start from browser
Set whether to start software from site.
y
"Yes"/"No"
Start from mailer
Set whether to start software from a mail.
y
"Yes"/"No"
Start from IR
Set whether to start software via infrared communications.
y
"Yes"/"No"
Start from Barcode
Set whether to start software from barcode reader.
y
"Yes"/"No"
Change ring/image
Set whether to allow, when software is started, to
automatically change an image and/or melody set for ring
alert or on the Wallpaper screen.
y
"Yes"/"No"/"Confirm every set-up?"
Phbook/Dials acc.
Set whether to allow to reference the phonebook and
reception history when software is started.
y
"Yes"/"No"
• Depending on the settings in "Permissions", the
software may not connect to the network (Unread
messages or battery level, etc. may not be
available).
• When this is set to "No", the software may not start,
or real-time information may not be provided.
• When this is set to "Yes", the software automatically
connects to the network. While connected, packet
communication charges apply.
• When this is set to "Yes", the software automatically
connects to the network. While connected, packet
communication charges apply.
• When set to "Yes", information about the status of
the handset as indicated by the presence of icons
for unread mail, messages, battery level, Manner
Mode, inside the service area, and outside the
service area may be sent to Information Providers
(IP) via the Internet in the same manner as "Serial
Number of your Mobile Phone/UIM" is sent. The
icon information may be intercepted by a third party.
Auto-start
Automatically Starting i-appli
• Date and Time need to be set in advance in order to
start an i-appli automatically. → P48
Setting whether to Automatically Start
You can set whether to start an i-appli
automatically.
a
cy
(Settings)
y
"i-appli Settings"
y
"Auto-start"
On : Permit Auto-start.
Off : Do not permit Auto-start.
Setting Start Date/Time
Set the date and time when the software starts
automatically. You can set different dates and
times for each piece of software, or you can use
the pre-set Auto-start functions of the software.
a
Software list screen (P212)
y
Select
software
yh
[Function]
y
"Auto-start"
y
Perform the following operations
• "Date", "Day", and "Time" are displayed according
to the setting in "User".
Common
Network Access
Stand-by net
GetSysInfo
Default On
Default Off
Au
to
-st
a
rt