37
Supplementary Explanation of AT
Commands
■
Command name : +CGDCONT
• Overview
Set APN when sending packet connection.
• Form
+CGDCONT=[<cid>[,“<PDP type>” [ ,“<APN>”]
] ]
• Parameter descriptions
Set APN when sending Packet communication.
See examples in command operation lists
<cid>*
: 1 to 10
<PDP type>* : PPP or IP
<APN>*
: Optional
*: <cid> is the number used to control the
destination (APN) for the Packet communication
to be registered in FOMA handset. 1 to 10 can
be registered. The default cid1 is registered
"mopera.ne.jp" for APN of "mopera" and cid3 is
registered "mopera.net" for APN of "mopera U",
when you set cid, 2 or a number between 4 and
10.
<PDP type> is a protocol for packet
communication.
<APN> is optional connection name that
indicates each destination.
• Operation without parameter
AT+CGDCONT= :
Delete all cid settings. However, settings for
cid1 and cid3 will be reset to their defaults.
AT+CGDCONT=? :
Display list of values that can be configured
AT+CGDCONT=? :
Display list of values that can be configured
• Command examples
Registered APN named abc (When PDP type
is “PPP” and cid=3)
AT+CGDCONT=3,“PPP”,“abc”
OK
* Not reset by [&F] and [Z], either.
■
Command name : +CGEQMIN=[Parameter]
• Overview
Save the judgment criteria values whether to
allow the QoS (Service Quality) sent by the
network when packet communication is
established via PPP connection.
• Form
+CGEQMIN=[<cid>[,,<Maximum bitrate UL>[,
<Maximum bitrate DL>] ] ]
• Parameter description
<cid>* : 1 to 10
<Maximum bitrate UL>* : None (default) or 64
<Maximum bitrate DL>* : Non (default) or 384
*: <cid> is the number used to control the
destination (APN) for the Packet communication
to be registered in FOMA handset. 1 to 10 can
be registered. The default cid1 is registered
"mopera.ne.jp" for APN of "mopera" and cid3 is
registered "mopera.net" for APN of "mopera U",
when you set cid, 2 or a number between 4 and
10.
In <Maximum bitrate UL> and <Maximum bit
rate DL>, the minimum connection speed [Kbps]
is set for both upload and download traffic
between FOMA handset download traffic
between FOMA handset and the base station. If
the parameter is set to None (default), all speeds
are permissible. If values are set, any
communication at a speed under the set value is
not permitted, and the Packet communication
will not be connected.
• Operation without parameter
AT+CGEQMIN= :
Set all <cid> as default value
AT+CGEQMIN=<cid> :
Set specified <cid> as default value
• Command examples
(1) Command used to permit all speed both
upload and download both upload and
download (when<cid>=2)
AT+CGEQMIN=2
OK
(2) Command used to permit only 64Kbps
upload and 384Kbps download
(when<cid>=2)
AT+CGEQMIN=2,,64,384
OK
(3) Command used to permit 64Kbps upload
and all speed download (when<cid>=3)
AT+CGEQMIN=3,,64
OK
(4) Command used to permit all speed upload
and only 384Kbps download
(when<cid>=3)
AT+CGEQMIN=3,,,384
OK
* Not reset by [&F] and [Z], either.
■
Command name : +CGEQREQ=[Parameter]
• Overview
Set the QoS (Service Quality) requested to the
network when packet communication via PPP
connection is dialed.
• Form
+CGEQREQ=[<cid>[,<traffic class>,
<Maximum bit rate UL>
[ ,<Maximum bitrate DL>] ] ]
• Parameter Description
<cid>* : 1 to 10 <traffic class> : 2
<Maximum bitrate UL>* : 64
<Maximum bitrate DL>* : 384
*: <cid> is the number used to control the
destination (APN) for the Packet communication
to be registered in FOMA handset.
1 to 10 can be registered to FOMA handset. The
Continued on the next page
Содержание M702iG
