Foma M702iG, Руководство пользователя

Страница: 230 / 433

223
i-Ch
ann
e
l
Trial service will be started automatically in
principle when a predetermined period of time
has elapsed after inserting UIM and starting to
use i-Channel compatible handset. When it is
not started automatically, press
h
to start it.
Trial service can be used only once for 1
subscriber line. Trial service will be terminated
automatically when a predetermined period of
time has elapsed after the start. For the
procedure to terminate it halfway, refer to
"Mobile Phone User's Guide
【
i-mode
】
".
• For precautions and details of using the trial service,
refer to "Mobile Phone User's Guide
【
i-mode
】
".
Using i-Channel
When you have subscribed to i-Channel,
information automatically appears as telop on
the Wallpaper screen upon reception of
information.
• To automatically display telop, see "Telop display" to
"ON".
→
P223
• When Public Mode (Drive Mode) is set, the telop will
not be displayed.
a
h
b
Select a channel item
y c
The site is connected and detail information
appears.
•
l
: The channel list screen reappears.
• Even when information is received, no ring alert or
vibrator operates. Also, the Call Indicator does not
light/blink.
• Information may not be received when the handset
power is turned off, while out of the service area, or
when the signal reception is weak. Press
h
to
receive information. The telop on the Wallpaper
screen will show the information automatically. Also,
information may not be received using the default
settings. In this case, press
h
to receive
information. The telop on the Wallpaper screen will
show the information automatically.
• Depending on the operating conditions, information
may be received at the timing a channel list is
displayed.
• If you change the connection destination in "Host
setting" of "i-mode setting", the connection
destination of i-Channel is also changed. (Normally,
you do not need to change the settings).
• The telop will not appear after i-Channel is
cancelled.
• Setting "Stand-by" to "On" when the Telop is being
displayed hides the Telop. To display the Telop, set
"Telop display" to "ON" again.
• A message to the effect of failure of channel
information acquisition may appear in the following
cases:
- When i-Channel connection destination has been
changed
- When the "Master Clear" has been performed
- When UIM has been replaced
i-Channel Setting
Setting i-Channel
You can set whether to display telop on the
Wallpaper screen or set the telop display style.
a
Channel list screen (P223)
y h
[Function]
y
Perform the following
operations
Telop display
Set whether to display channel information in the telop style
on the Wallpaper screen.
y
"ON"/"OFF"
Telop speed
Set the telop moving rate.
y
"Low speed"/"Usually"/"High speed"
Telop setting
SWAP
Call up another function such as phonebook, datebook.
→
P258
Telop
Telop
h
Channel list
screen
Default
Telop display: ON
Telop speed: Usually
Telop setting: Font color (Green)/
Background color (Black)
Font color
Background color
: Set the font color of the telop.
y
Select a font color
y h
[Select]
: Set the background color of the
telop.
y
Select a background color
y
h
[Select]
Using
i-C
h
an
nel
Continued on the next page