FNM HPE 300, Руководство пользователя

Страница: 75 / 78

Marine Diesel Engines
O
WNER
’
S
M
ANUAL
Engine maintenance
HPE300
ENG rel. 1/11
www.fnm-marine.com
81
Engine maintenance operations summary table
Activities
Even 10 hours before start Weekly
By owner
Achievable by
service
By owner By service
Engine oil level *
Engine coolant level *
Verify integrity /clean:
-sea water strainer
-sea water tap
-sea water piping.
*
Verify for any leaks on fuel circuit . *
Verify oil level:
-transmission
-trim
-steering system
*
Verify for any leaks on -engine coolant
system .
*
Battery electrolyte level *
Verify propeller anodes / stern drive
corrosion status
*
Activities
First 50 hrs
–first two months
After first 200 hrs /every years
By owner
Achievable by
service
By owner
Achievable by
service
Lubricating prop nut, grease the
transmission couplings (joints, spherical
heads, splines, etc.)
*
Anodes consumption * *
Engine oil change ( first change after 30
hrs)
* *
Check the belts and tighteners status * *
Verify engine-transmission alignment
and screw the flex mounting nuts .
* *
Verify screwing torque (bolts, nut
clamps)
* *
Verify/clean the electrical connections * *
Air filter cleaning. * * * *
Verify /change the sea water pump * *
Verify the turbo charger actuator
functioning /grease the turbocharger
where required
* * *
Clean the sea water circuit from any
deposits, clean the exchangers
*
Engine oil change *
Oil filter replacement *
Fuel filter replacement *
Replace the anodes (if necessary) * *
Sea water pump impeller replacement * *
Stern drive gear oil replacement
(Mercruiser ® first 100 hours )
*
Lubricate splined joints, etc. *
Engine starter pinion greasing *
Mercathode® system continuity
inspection .
*
Verify the transmission fluids level *
Every 800 hours or every 2 years
Activities (over the annual maintenance) By owner By Service
Timing/auxiliary belts replacement. *
Replace the coolant liquid. *
Check the engine
–propulsion alignment.
*
Check for any leaks on the engine circuit. *
Check the flexible coupler status. *
Check the engine battery status (replace if necessary). *