Website
7
3. Getting Started
3.1 Transmitter Battery Installation
The Noble Pro has 2 batteries, one located in the handle and one in the removeable base.
To attach the base:
1. Line up the base so that the transmitter handle has a slight over hang on the back.
2. Carefully insert the base contacts into the hole in the bottom of the handle.
3. Hold the handle firmly and pull the battery backwards. When it is secure you should hear a click.
Steps to disassemble the base:
① Push the base upward
② Push the base forward
③ Remove the base
Before operation, install the battery and connect the system as instructed below.
Danger
• Only use included batteries
Danger
• Do not open, disassemble, or attempt to repair the battery.
Danger
• Do not crush/puncture the battery, or short the external contacts.
Danger
• Do not expose to excessive heat or liquids.
Danger
• Do not drop the battery or expose to strong shocks or vibrations.
Danger
• Always store the battery in a cool, dry place.
Danger
• Do not use the battery if damaged.
