Website
17
6.9 Model
[Select Model]: To select a model touch "Select Model", then touch a model from the list.
[Name: FlySky 01]: After clicking, use the keyboard in the interface to type in a new name.
[Channel Number Definition]: this function is used to select the number of channels. If the larger number of
channels is switched to the lower number of channels, the system will prompt "After switching you need re-binding,
Are you sure?". Click "Yes". Switching is successful.
When the lower number of channels is switched to the larger number of channels, model data will not be reset. The
system will prompt "
The model will reset , need re-binding, Are you sure
?". Click "Yes". Switching is successful.
After choosi
ng [CH2 (Fast)],
only two channels for steering and throttle are retained. This makes operations easier
and channel delay experiences are richer. It is suitable for new players and players who like different throttle speed
experiences.
The model functions are used to change, reset, rename, copy or customize the display and sorting of the main
menu. The Noble Pro can store up to 20 models.
[RF Setup]: it includes RF protocol setup and RF module update of the transmitter and receiver.
[AFHDS3 one-way]: it features lower latency, allowing one transmitter to connect multiple receivers. It is applied
when the model does not need any return data.
[AFHDS3 two-way]: with the two-way return function, it can return feedback data from receivers and sensors and
realize one transmitter to one receiver.
[Mini-Z(EVO)]: it is used with Kyosho FHSS receiver to control the cars of Kyosho miniZ EVO. The number of channels
is fixed (two channels).
[Mini-Z(FHSS)]: it is used with a Kyosho FHSS receiver to control the cars of Kyosho miniZ FHSS. The number of
channels is fixed (four channels).
Click the icon to enter the [Keys Assign]. In this list, you can view detailed information
about the function assignment of all keys and knobs. You can directly click the
corresponding button function to set the function.
SW2, SW3, SW1-L and SW1-R can be used to control the enabling, disabling, or switching of channel 3 to channel 18,
as well as multiple functions.
1.Click [SW2] or other key icons to enter the function setting interface;
If you want to change the [Key Type], click [Single Key] on the right side to switch.VR1-L、The functions of VR1-L and
VR1-R are the same as above, but the step is not adjustable.
FS-RM005 RF head supports a Noble Pro transmitter. It is only compatible with Kyosho
Mini-Z (FHSS) cars.
Bind steps:
1. Remove the transmitter base's mobile power supply and insert the RF head into the
transmitter base correctly
(as shown in the figure on the right)
.
2. Click [MODEL]. Select the RF setting as Mini-Z (FHSS).
3. Insert it and re-install the transmitter base power supply.
